The camera has it usual set up. We have the boom set up so that there is a standard light on it with a soft box facing directly downwards. There are two other lights that need to be set up. One of the lights will have to gobo on it, and the other will have a grid spot. The main thing with this set up is that it has a slightly harsher tone. It creates more shadows unlike the previous set ups we have done. To get the gobo up and running all you need to do is pick one with a design on it and slide it in, focus it and then it's done.
To figure out whether or not we have got the correct power on each light we need to turn all off apart from one and then figure out what we were working with and then slowly add in the other lights. The gobo won't work on a black background as it won't show up however it will work on a white one. The only problem is that the light from the boom fills in most of the shadows making it still slightly harder to the template. We brought in some black poly boards to help block out some light.
We tried moving the gobo around so we decided to place it on the boom. We were going to put a light on a stand and then put it up high so we can still get that good lighting, however this is incredibly unsafe as the stand can easily fall over. This meant that we didn't have a light so we had to turn the power right up on the gobo. The images still came out rather dark and there are only two things we could change to make the image brighter. We could either open up the aperture or turn up the ISO. We ended up putting the ISO to 400.
We then placed two black poly boards facing the model. We then started using the light with the grid spot which caused more vignetting. Place the light so that it is pointing on the background. Because of where we placed the light it meant the flash didn't go off so we had to move the sync lead to the secondary back light. we also turned down the power on the flash so that even more vignetting occurred, however if you turn it down too much it will cause a silhouette image.


No comments:
Post a Comment